Surgical instrument processing improves the safety of surgical care in hospitals, yet some facilities continue to rely on a paper trail to track instruments at the tray level. This creates potentially dangerous and expensive risks.
Misplaced instruments may result in buying unneeded replacements or canceling procedures. Not being able to identify which instruments were used in a case means not knowing if all those instruments came back or ended up in a patient.
The National Center for Biotechnology Information estimates the mortality rate of retained surgical objects at almost 2 percent1. Utilizing marked instruments and counting instruments in operating rooms greatly reduces the chance of leaving an instrument in a patient or accidentally disposing of it in the laundry or trash bin.
Meanwhile, hospital-acquired infections have increased. The Centers for Disease Control (CDC) estimates that almost 99,000 individuals die because of hospital-acquired infection in the U.S. each year. That should make infection prevention from contaminated instruments a number one priority for any hospital or surgery center. Having better control over surgical inventory reprocessing can help.
Sterilization of surgical instruments is an exact science that has certain specific steps that must be followed. Benchmarks must be met in order for the instruments to be considered sterilized to patient safety and institutional guidelines. All the steps in the procedures must be tracked and documented, or they might as well not have occurred.
Having a dedicated sterile processing department (SPD) gives healthcare facilities more control over the process. Personnel must be trained and updated on:
Good news, customers who use CensiTrac® can correctly and efficiently perform and document all steps and required information in one system!
Many sterile processing departments still track only to the tray level. This may result in being out of compliance with regulatory standards. In May 2021, the FDA established the unique device identification (UDI) system, which now links surgical instruments directly to the patient. A high-quality surgical asset management system is more important now than ever.
When CensiTrac® was developed, it was the first surgical asset management system to track each individual instrument in a set. Over time, it has allowed SPD staff to be in complete control of their inventory, including details such as:
The software interfaces seamlessly with OR scheduling, to make sure that each tray and each instrument required is located, processed, and put back into service as needed. Assets can be marked through Censis’ CensiMark® program, which offers laser, electrochemical, and other marking methods, depending on the instrument or institution’s preferences. CensiTrac makes specific information about tracked equipment easily accessible. In a matter of minutes, you have the information you need when you need it.
To avoid disruptions to your workflow, the Censis team can come on-site and mark your instruments or provide training and the hardware for you to do your own marking. That allows you to:
Scanning each instrument into the system can help guarantee you have the correct instrument in the container, the correct name on a peel pack, and will alert staff if an instrument is due for maintenance.
Bringing your facility into the light of sterile processing excellence gives you control over your surgical asset management from a regulatory, patient safety, cost-effectiveness, and employee empowerment point of view. It all starts with capturing each individual instrument and finding its place in your system.